MCLAREN MP4 650S WHEELS SET

$2,500.00

Quantity
Wishlist
SKU: HAJBF
Category:

MCLAREN MP4 650S WHEELS SET – 19/20 INCH

McLaren MP4 650S 19/20-inch wheel set for compatible 650S applications. This staggered wheel configuration uses 19-inch front wheels and 20-inch rear wheels and is suitable for replacement or restoration of the factory wheel setup.MCLAREN MP4 650S WHEELS SET

PRODUCT SPECIFICATIONS

  • Brand: McLaren
  • Model: MP4 650S
  • Product: Complete Wheel Set
  • Wheel Configuration: Staggered
  • Front Wheel Diameter: 19 inches
  • Rear Wheel Diameter: 20 inches
  • Front Wheel Width: Confirm
  • Rear Wheel Width: Confirm
  • Front Offset: Confirm
  • Rear Offset: Confirm
  • Bolt Pattern: 5 x 112
  • Center Bore: Confirm
  • Condition: Confirm actual condition
  • Center Caps: Confirm
  • TPMS Sensors: Confirm
  • Wheel Bolts: Confirm

FRONT WHEELS

The set includes 19-inch front wheels designed for the McLaren MP4 650S.

Verify:

  • Wheel width
  • Offset
  • Part number
  • Center bore
  • Brake clearance
  • Wheel finish
  • Mounting surface

REAR WHEELS

The set includes 20-inch rear wheels, providing the factory-style staggered front/rear wheel arrangement used on the McLaren 650S.

Verify:

  • Wheel width
  • Offset
  • Part number
  • Center bore
  • Brake clearance
  • Wheel finish
  • Mounting surface

McLAREN 650S FACTORY WHEEL CONFIGURATION

The McLaren 650S uses a staggered wheel arrangement with 19-inch front wheels and 20-inch rear wheels.

Factory wheel specifications can vary according to wheel design and vehicle specification, so the exact dimensions and offsets should be checked against the wheels supplied with this listing.

FITMENT

The advertised application is:

McLaren MP4 650S

Potential applications may include:

  • McLaren 650S Coupe
  • McLaren 650S Spider

Confirm compatibility with the vehicle VIN before ordering.

Wheel fitment should be checked based on:

  • Model year
  • Body style
  • Wheel design
  • Wheel width
  • Offset
  • Bolt pattern
  • Center bore
  • Brake package
  • Tire size

WHEEL CONDITION

For used wheels, inspect each wheel for:

  • Cracks
  • Bends
  • Curb damage
  • Scratches
  • Paint defects
  • Previous repairs
  • Corrosion
  • Damaged mounting holes
  • Damaged valve areas

The wheels should be professionally inspected and balanced before installation.

CENTER CAPS & HARDWARE

Confirm whether the following are included:

  • 4 × center caps
  • Wheel bolts
  • Locking wheel nuts
  • Valve stems
  • TPMS sensors

Do not assume these components are included unless specifically stated in the listing.

TPMS

Confirm whether the wheels are equipped with tire-pressure monitoring sensors.

If sensors are not included, compatible sensors may need to be installed before the wheels are fitted to the vehicle.

TIRE COMPATIBILITY

If the wheel set is supplied without tires, the correct tire sizes must be selected according to the McLaren 650S specification and the exact wheel widths.

Check:

  • Front tire size
  • Rear tire size
  • Load rating
  • Speed rating
  • Tire manufacturer specification
  • Approved tire fitment
  • Tire age and condition if used

INSTALLATION

Professional installation is recommended.

  1. Confirm wheel part numbers.
  2. Verify front and rear dimensions.
  3. Check offsets.
  4. Confirm 5 x 112 bolt pattern.
  5. Inspect all four wheels.
  6. Check brake clearance.
  7. Install suitable tires.
  8. Balance the wheel and tire assemblies.
  9. Install TPMS sensors if required.
  10. Fit the wheels using the correct hardware.
  11. Torque the wheel bolts to the manufacturer’s specification.
  12. Check steering and suspension clearance.
  13. Reset the TPMS system if applicable.
  14. Complete a final road inspection.

IMPORTANT FITMENT NOTICE

The description “19/20 inch wheel set” identifies the wheel diameter but does not provide the exact wheel width, offset, part numbers or finish.

These specifications should be confirmed before purchase to ensure correct fitment to the intended McLaren 650S.

BUYER CHECKLIST

  • Brand: McLaren
  • Model: MP4 650S
  • Product: Wheel Set
  • Front Diameter: 19 inch
  • Rear Diameter: 20 inch
  • Bolt Pattern: 5 x 112
  • Front Width: Confirm
  • Rear Width: Confirm
  • Front Offset: Confirm
  • Rear Offset: Confirm
  • Part Numbers: Confirm
  • Center Caps: Confirm
  • TPMS: Confirm
  • Wheel Bolts: Confirm
  • Condition: Confirm
  • VIN Compatibility: Recommended

McLaren MP4 650S wheels, McLaren 650S wheels, McLaren 650S wheel set, McLaren MP4 650S wheel set, McLaren 650S rims, McLaren 650S OEM wheels, McLaren 650S original wheels, McLaren 650S 19 inch wheels, McLaren 650S 20 inch wheels, McLaren 650S 19 20 inch wheels, McLaren 650S staggered wheels, McLaren 650S front wheels, McLaren 650S rear wheels, McLaren 650S wheel replacement, McLaren 650S wheels for sale, McLaren MP4 650S rims for sale, genuine McLaren 650S wheels, McLaren 650S OEM rim set, McLaren 650S alloy wheels, McLaren 650S factory wheels, McLaren 650S replacement rims, buy McLaren 650S wheels, McLaren 650S Coupe wheels, McLaren 650S Spider wheels

Reviews

There are no reviews yet.

Be the first to review “MCLAREN MP4 650S WHEELS SET”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top